Get started

WEEGLOO is a platform that turns the screens you create into a real service. Without having to learn how to use a content studio or any communication format, you just tell the AI agent you already use in plain language, and it takes care of everything needed behind the screen, from members and data to publishing and deployment. Underneath it all is a content management system (CMS) that can handle even large-scale services, so you can put any kind of service on top of it. Connect it, and one line is all it takes.

1. Prerequisites

You need Node.js to run the installation commands below. First, use these commands to check whether it is installed and whether the version is 18 or later.

Terminal
node --version # v18 or higher is OK npx --version # OK if a version is printed

If Node.js is installed but npx is not, update npm to the latest version with the command below. Updating npm installs npx as well.

Terminal
npm install -g npm@latest

If Node.js is not installed, or if the version is too old, install Node.js using the method for your operating system.

Terminal
brew install node

If you do not have Homebrew, install it first from brew.sh (opens in a new tab), or download Node.js directly from nodejs.org (opens in a new tab).

Terminal
winget install OpenJS.NodeJS.LTS

If winget is not installed or not recognized, download the LTS installer from nodejs.org (opens in a new tab). After installation, open a new terminal.

Distribution packages may be outdated, so we recommend installing with nvm, which works across many distributions.

Terminal
curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.5/install.sh | bash source ~/.bashrc nvm install --lts

To download the installer directly, check nodejs.org (opens in a new tab).

2. Connect your AI agent

Select the coding tool you use. For a basic install, copy the install command on this page and run it once in your terminal. To choose each install step yourself, open Custom install.

Coding tool

1

Install MCP and Skills

Copy the install command and run it in your terminal.

Terminal
$ npx weegloo@latest -y \ --agent claude
2

Authenticate the MCP connection

Authenticate in the following order.

This step requires the Claude Code CLI (claude). If you do not have it yet, install Claude Code (opens in a new tab).

  1. Run Claude Code in your terminal.

    Terminal
    claude

  2. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  3. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

  4. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  5. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

Run npx weegloo interactively and install by choosing each prompted item yourself.

Install location
1

Run the install tool

Run the command below in your terminal and choose each prompted item in turn.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Claude Code ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Global … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

This step requires the Claude Code CLI (claude). If you do not have it yet, install Claude Code (opens in a new tab).

  1. Run Claude Code in your terminal.

    Terminal
    claude

  2. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  3. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

  4. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  5. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Claude Code ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

This step requires the Claude Code CLI (claude). If you do not have it yet, install Claude Code (opens in a new tab).

  1. Run Claude Code in your terminal. You must run it inside the project folder you want to connect.

    Terminal
    claude

  2. On first run, it may ask whether to enable the new MCP servers. In that case, confirm that weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    New MCP servers found in .mcp.json Select any you wish to enable. > [√] weegloo [√] weegloo-upload

  3. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  4. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

    If the servers do not appear in the list: If weegloo and weegloo-upload do not appear in the list, you may not have submitted them on the enable screen in step 2, or they may be disabled. Quit Claude Code, enter the command below in your terminal, and run claude again. When the same screen as step 2 appears again, make sure weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    claude mcp reset-project-choices

  5. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  6. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

1

Install MCP and Skills

Copy the install command and run it in your terminal.

Terminal
$ npx weegloo@latest -y \ --agent claude
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Claude Code in your terminal.

    Terminal
    claude

  2. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  3. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

  4. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  5. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

Run npx weegloo interactively and install by choosing each prompted item yourself.

Install location
1

Run the install tool

Run the command below in your terminal and choose each prompted item in turn.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Claude Code ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Global … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Claude Code in your terminal.

    Terminal
    claude

  2. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  3. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

  4. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  5. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Claude Code ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Claude Code in your terminal. You must run it inside the project folder you want to connect.

    Terminal
    claude

  2. On first run, it may ask whether to enable the new MCP servers. In that case, confirm that weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    New MCP servers found in .mcp.json Select any you wish to enable. > [√] weegloo [√] weegloo-upload

  3. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  4. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

    If the servers do not appear in the list: If weegloo and weegloo-upload do not appear in the list, you may not have submitted them on the enable screen in step 2, or they may be disabled. Quit Claude Code, enter the command below in your terminal, and run claude again. When the same screen as step 2 appears again, make sure weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    claude mcp reset-project-choices

  5. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  6. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

1

Install MCP and Skills

Copy the install command and run it in your terminal.

Terminal
$ npx weegloo@latest -y \ --agent codex
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Running the command below in your terminal opens the WEEGLOO authentication page in your browser.

    Terminal
    codex mcp login weegloo

  2. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow. An agent that was already running needs to be restarted after authentication completes for the changes to take effect.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

Run npx weegloo interactively and install by choosing each prompted item yourself.

Install location
1

Run the install tool

Run the command below in your terminal and choose each prompted item in turn.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Codex ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Global … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Running the command below in your terminal opens the WEEGLOO authentication page in your browser.

    Terminal
    codex mcp login weegloo

  2. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow. An agent that was already running needs to be restarted after authentication completes for the changes to take effect.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Codex ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Running the command below in your terminal opens the WEEGLOO authentication page in your browser.

    Terminal
    codex mcp login weegloo

  2. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow. An agent that was already running needs to be restarted after authentication completes for the changes to take effect.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

1

Install MCP and Skills

Copy the install command and run it in your terminal.

Terminal
$ npx weegloo@latest -y \ --agent cursor
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Click Customize in the menu at the top left of Cursor.

  2. In the filter at the top, select MCPs, then click weegloo, shown as Disabled in the list, to open its settings window. weegloo-upload is connected without any separate setup.

  3. In the Configure weegloo window, turn on the User (~/.cursor/mcp.json) toggle.

  4. When Local changes to Needs Authentication, click Authenticate on the right.

  5. The WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

  6. When Local changes to Connected, the connection is complete. Click Done to close the window.

Run npx weegloo interactively and install by choosing each prompted item yourself.

Install location
1

Run the install tool

Run the command below in your terminal and choose each prompted item in turn.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Cursor ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Global … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Click Customize in the menu at the top left of Cursor.

  2. In the filter at the top, select MCPs, then click weegloo, shown as Disabled in the list, to open its settings window. weegloo-upload is connected without any separate setup.

  3. In the Configure weegloo window, turn on the User (~/.cursor/mcp.json) toggle.

  4. When Local changes to Needs Authentication, click Authenticate on the right.

  5. The WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

  6. When Local changes to Connected, the connection is complete. Click Done to close the window.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Cursor ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Click Customize in the menu at the top left of Cursor.

  2. In the filter at the top, select MCPs, then click weegloo, shown as Disabled in the list, to open its settings window. weegloo-upload is connected without any separate setup.

  3. In the Configure weegloo window, turn on the toggle under Source.

  4. When Local changes to Needs Authentication, click Authenticate on the right.

  5. The WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

  6. When Local changes to Connected, the connection is complete. Click Done to close the window.

MCP authentication can be unstable in Antigravity

The weegloo MCP server uses a standard stateful HTTP MCP connection, but Antigravity's support for stateful MCP connections is not yet stable, so authentication may fail or need to be retried. If you want a more stable setup flow, we recommend using Claude Code, Codex, or Cursor.

1

Install MCP and Skills

Copy the install command and run it in your terminal.

Terminal
$ npx weegloo@latest -y \ --agent antigravity
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Antigravity with agy.

    Terminal
    agy

  2. Enter /mcp at the prompt.

    Terminal
    /mcp

  3. Select weegloo.

    Terminal
    MCP Servers Plugins (~/.gemini/config/plugins) > ✗ weegloo error: calling "initialize": sending "initialize": Unauthorized [Auth Needed] ✓ weegloo-upload Tools: CreateUpload Keyboard: ↑/↓ Navigate enter Actions

  4. Select Authenticate.

    Terminal
    MCP Servers Plugins (~/.gemini/config/plugins) > ✗ weegloo error: calling "initialize": sending "initialize": Unauthorized [Auth Needed] Restart Disable [Authenticate] ✓ weegloo-upload Tools: CreateUpload Keyboard: ←/→ Navigate enter Actions

  5. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

  6. Copy the Code shown on the Google Antigravity page, return to Antigravity, paste it, and press Enter.

    If it shows as an authentication failure

    If the message Authentication failed: no pending auth state for server weegloo appears, it may be a temporary problem on the Antigravity side. This is mostly seen in versions below 1.0.16 but can also occur in the latest versions, and you can reconnect with the steps below.

    1. Press Esc to return to the MCP Servers screen.
    2. Press Esc once more to return to the prompt input screen.
    3. Enter /mcp again and it connects after going through the initializing step.

Run npx weegloo interactively and install by choosing each prompted item yourself.

Install location
1

Run the install tool

Run the command below in your terminal and choose each prompted item in turn.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Antigravity CLI ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Global … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Antigravity with agy.

    Terminal
    agy

  2. Enter /mcp at the prompt.

    Terminal
    /mcp

  3. Select weegloo.

    Terminal
    MCP Servers Plugins (~/.gemini/config/plugins) > ✗ weegloo error: calling "initialize": sending "initialize": Unauthorized [Auth Needed] ✓ weegloo-upload Tools: CreateUpload Keyboard: ↑/↓ Navigate enter Actions

  4. Select Authenticate.

    Terminal
    MCP Servers Plugins (~/.gemini/config/plugins) > ✗ weegloo error: calling "initialize": sending "initialize": Unauthorized [Auth Needed] Restart Disable [Authenticate] ✓ weegloo-upload Tools: CreateUpload Keyboard: ←/→ Navigate enter Actions

  5. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

  6. Copy the Code shown on the Google Antigravity page, return to Antigravity, paste it, and press Enter.

    If it shows as an authentication failure

    If the message Authentication failed: no pending auth state for server weegloo appears, it may be a temporary problem on the Antigravity side. This is mostly seen in versions below 1.0.16 but can also occur in the latest versions, and you can reconnect with the steps below.

    1. Press Esc to return to the MCP Servers screen.
    2. Press Esc once more to return to the prompt input screen.
    3. Enter /mcp again and it connects after going through the initializing step.
1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Antigravity CLI ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Antigravity with agy.

    Terminal
    agy

  2. Enter /mcp at the prompt.

    Terminal
    /mcp

  3. Select weegloo.

    Terminal
    MCP Servers Plugins (~/.gemini/config/plugins) > ✗ weegloo error: calling "initialize": sending "initialize": Unauthorized [Auth Needed] ✓ weegloo-upload Tools: CreateUpload Keyboard: ↑/↓ Navigate enter Actions

  4. Select Authenticate.

    Terminal
    MCP Servers Plugins (~/.gemini/config/plugins) > ✗ weegloo error: calling "initialize": sending "initialize": Unauthorized [Auth Needed] Restart Disable [Authenticate] ✓ weegloo-upload Tools: CreateUpload Keyboard: ←/→ Navigate enter Actions

  5. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

  6. Copy the Code shown on the Google Antigravity page, return to Antigravity, paste it, and press Enter.

    If it shows as an authentication failure

    If the message Authentication failed: no pending auth state for server weegloo appears, it may be a temporary problem on the Antigravity side. This is mostly seen in versions below 1.0.16 but can also occur in the latest versions, and you can reconnect with the steps below.

    1. Press Esc to return to the MCP Servers screen.
    2. Press Esc once more to return to the prompt input screen.
    3. Enter /mcp again and it connects after going through the initializing step.

Using Android Studio for Weegloo integration is strongly discouraged

Android Studio's built-in AI agent (Gemini) can be used for UI work. However, for code work like Weegloo integration it is very unstable due to AI performance issues, so we strongly recommend using another AI agent such as Claude Code or Codex. Confirmed in 2026.1.1 Patch 2 and earlier versions.

1

Install MCP and Skills

Copy the install command and run it in your terminal. You must run it inside the project folder you want to connect.

Terminal
$ npx weegloo@latest -y \ --agent androidstudio \ --token <Personal Access Token>
2

Authenticate the MCP connection

Once installation finishes, you need to enable the MCP server in Android Studio.

  1. Go to Settings → Tools → AI → MCP Servers, then click the JSON View tab.

  2. Check Enable MCP Servers.

  3. Confirm that weegloo and weegloo-upload are present in the configuration.

  4. Click Apply to apply the settings. You can confirm the connection succeeded by the notification that you are connected to weegloo and weegloo-upload.

Run npx weegloo interactively and install by choosing each prompted item yourself.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Where it asks for the token, copy your token with the Copy token button below and paste it. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Android Studio ✔ What would you like to install? MCP server, Skills and Rules ✔ Enter your Weegloo Personal Access Token: **** ← the token you copied ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Once installation finishes, you need to enable the MCP server in Android Studio.

  1. Go to Settings → Tools → AI → MCP Servers, then click the JSON View tab.

  2. Check Enable MCP Servers.

  3. Confirm that weegloo and weegloo-upload are present in the configuration.

  4. Click Apply to apply the settings. You can confirm the connection succeeded by the notification that you are connected to weegloo and weegloo-upload.

Agent to use in Xcode

1

Install MCP and Skills

Copy the install command and run it in your terminal. You must run it inside the project folder you want to connect.

Terminal
$ npx weegloo@latest -y \ --agent claude \ --host xcode \ --location project
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Claude Code in your terminal. You must run it inside the project folder you want to connect.

    Terminal
    claude

  2. On first run, it may ask whether to enable the new MCP servers. In that case, confirm that weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    New MCP servers found in .mcp.json Select any you wish to enable. > [√] weegloo [√] weegloo-upload

  3. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  4. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

    If the servers do not appear in the list: If weegloo and weegloo-upload do not appear in the list, you may not have submitted them on the enable screen in step 2, or they may be disabled. Quit Claude Code, enter the command below in your terminal, and run claude again. When the same screen as step 2 appears again, make sure weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    claude mcp reset-project-choices

  5. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  6. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

After installation, you need to open a new Xcode Agent session for the settings to take effect.

Run npx weegloo interactively and install by choosing each prompted item yourself.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Claude Code ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Run Claude Code in your terminal. You must run it inside the project folder you want to connect.

    Terminal
    claude

  2. On first run, it may ask whether to enable the new MCP servers. In that case, confirm that weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    New MCP servers found in .mcp.json Select any you wish to enable. > [√] weegloo [√] weegloo-upload

  3. Enter /mcp to open the MCP server management screen.

    Terminal
    /mcp

  4. Select weegloo from the list. It shows a needs authentication status.

    Terminal
    Manage MCP servers > weegloo · ∆ needs authentication weegloo-upload · √ connected

    If the servers do not appear in the list: If weegloo and weegloo-upload do not appear in the list, you may not have submitted them on the enable screen in step 2, or they may be disabled. Quit Claude Code, enter the command below in your terminal, and run claude again. When the same screen as step 2 appears again, make sure weegloo and weegloo-upload are checked and press Enter to submit.

    Terminal
    claude mcp reset-project-choices

  5. Check that the connection URL is https://ai.weegloo.com/mcp and select Authenticate.

    Terminal
    Weegloo MCP Server Status: ∆ needs authentication URL: https://ai.weegloo.com/mcp > 1. Authenticate 2. Disable

  6. When you select Authenticate, the WEEGLOO authentication page opens in your browser. Check that the signed-in account is correct, then click Allow. Once weegloo changes to connected, you are done.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

After installation, you need to open a new Xcode Agent session for the settings to take effect.

1

Install MCP and Skills

Copy the install command and run it in your terminal. You must run it inside the project folder you want to connect.

Terminal
$ npx weegloo@latest -y \ --agent codex \ --host xcode \ --location project
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Running the command below in your terminal opens the WEEGLOO authentication page in your browser.

    Terminal
    codex mcp login weegloo

  2. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow. An agent that was already running needs to be restarted after authentication completes for the changes to take effect.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

After installation, you need to open a new Xcode Agent session for the settings to take effect.

Run npx weegloo interactively and install by choosing each prompted item yourself.

1

Run the install tool

Move to the project folder you want to connect, then run the command below in that folder and choose each prompted item in turn. Be sure to run it inside that project folder.

Terminal
npx weegloo@latest
Terminal
✔ Select your IDE: Codex ✔ What would you like to install? MCP server, Skills and Rules ✔ Select the MCP server group: default ✔ Where would you like to install the configuration? Project … ✔ Installation complete!
2

Authenticate the MCP connection

Authenticate in the following order.

  1. Running the command below in your terminal opens the WEEGLOO authentication page in your browser.

    Terminal
    codex mcp login weegloo

  2. On the WEEGLOO authentication page that opens, check that the signed-in account is correct, then click Allow. An agent that was already running needs to be restarted after authentication completes for the changes to take effect.

    If you are not signed in to WEEGLOO in this browser, the sign-in screen opens first, and once you sign in, you return to the authentication page. If you have not yet agreed to the WEEGLOO Terms of Service, or the terms have changed, a checkbox for agreeing to the Terms of Service also appears. In that case, select the checkbox and then click Allow.

After installation, you need to open a new Xcode Agent session for the settings to take effect.

3. One line is all it takes

You do not even have to describe what you are building. This one line is enough.

Integrate this with WEEGLOO.

The agent looks at the screens you built and works out for itself what kind of service it is. Then it completes the features you need, such as members, permissions, and search. If it is a web service, it even handles deployment for you.

What comes next